Official UK Number Plate Fitting & Installation Guide
How to Fit Your Number Plates
Professional step-by-step guides for 3M ultra-bond sticky pads, anti-theft security screws, German snap surrounds, and show magnet kits.
Fitting with 3M Ultra-Bond High-Tack Adhesive Pads
Method 1: Screwless Stick-On Installation MOT Compliant
Fitting with 3M Ultra-Bond High-Tack Adhesive Pads
The cleanest method for modern 3D Gel and 4D Gel plates. No drilling required, completely weather-proof, resistant to jet washes up to 140 bar.
- Step 1
Remove Old Plates & Residue
Unscrew or gently pry off your existing plates using dental floss or a plastic pry tool. Use isopropyl alcohol or sticky-stuff remover to eliminate all old glue and road grime.
Pro tip: Bumper surface MUST be 100% grease-free and bone dry.
- Step 2
Surface Temperature Check
Ensure the vehicle bumper and ambient temperature is at least 15°C (60°F). If fitting in winter, gently warm the bumper and plate back with a domestic hairdryer.
Pro tip: Cold bumper plastic prevents adhesive acrylic curing.
- Step 3
Apply 3M Pads Vertically
Place 5 to 6 heavy-duty 3M foam pads vertically across the rear of each plate (spacing ~8cm apart). Vertical placement allows rainwater and wash water to drain freely.
Pro tip: Never apply horizontal lines as water can pool behind.
- Step 4
Align & Apply Heavy Pressure
Align plate centrally with bumper contours. Press firmly across all sections with the palm of your hand for at least 60 seconds. Full cure bond takes 24 hours.
Pro tip: Avoid high-pressure car washes for the first 24 hours.
DVLA Spacing & Legal Alignment Rules
When fitting new number plates in the United Kingdom, they must comply with British Standard BS AU 145e to pass MOT inspections and ANPR camera checks.
- Character Height & Width79mm Height × 50mm WidthStandard Charles Wright font
- Space Between Characters11mm DistanceBetween letters in same group
- Space Between Groups33mm GapE.g. YOUR [33mm] REG
- Outer Margin Border11mm Minimum MarginFrom character edge to plate border
Precision hardware
Shop fitting kits & accessories
Pads, security screws, German surrounds and magnetic kits are in the accessories shop, where each one can be added to your basket at the catalogue price.
Ready to create your custom set?
Launch the 3D/4D Master Plate Studio
Preview your real registration in ultra-gloss 3D gel or 4D gel with live British Standard BS AU 145e road legal certification.