Declaration of Legality
Every road plate we make is produced to BS AU 145e by a DVLA registered number plate supplier. This page explains what that means in practice, what we check before a plate is made, and what remains the customer’s responsibility.
What BS AU 145e covers
BS AU 145e is the British Standard for vehicle registration plates, and it applies to plates fitted from 1 September 2021. It sets out the characteristics a road plate must have, including its visibility, strength and reflectivity.
To meet the standard, a plate must be permanently and legibly marked with the standard number, with the name or trademark of the manufacturer or supplier, and with the name and postcode of the supplying outlet. That is how a plate can be traced to the business that made it.
The rules a road plate must meet
A road plate must be made from reflective material, display black characters on a white background at the front and a yellow background at the rear, and have no background pattern. It must be marked to show who supplied it, and carry the BS AU 145e marking when fitted from 1 September 2021, with single-shade black characters.
The characters must use the mandatory font at the fixed height, width, stroke and spacing, with the required margins. The registration must read exactly as issued: characters cannot be rearranged, and the spacing cannot be altered. Driving with plates that do not meet these rules can mean a fine of up to £1,000 and an MOT failure.
What we check before we make a plate
As a DVLA registered number plate supplier, we must check your documents before we make a road plate. One document shows that you are allowed to use the registration, and another proves who you are.
For entitlement, a V5C logbook is the usual proof, and a V750 certificate of entitlement, a V778 retention document or a number plate authorisation certificate can also be used. For identity, a driving licence or passport is typical. We check both before production, not after.
What stays your responsibility
We make the plate to the standard and check the documents the law requires us to check. Fitting the plates correctly, keeping the registration assigned to the vehicle, and using the plates only on the road in the way the law allows remain the registered keeper’s responsibility.
If you are ever unsure whether a plate or a design is right for your vehicle, ask us before you order. It is much easier to answer that question up front than to replace plates that should not have been fitted.